FAQs

The spaces left at the back of the profile are specially designed to easily conceal cables. The position of the transformer will depend on its size and shape, as well as the lighting profile used. The ideal position should be determined in advance depending on the installation conditions.

The more LEDs per metre, the less you will see the light spots. The diffuser provides an even, indirect and glare-free distribution of light.

The connection must be performed by a qualified electrician.

The recommendation is subject to the discretion of the LED manufacturer.

The visible parts of the profiles are primed and ready to be painted. Please pay attention to the diffuser (on the CL14) and the grooves for inserting the diffuser.

No, LED lights are not provided with the profiles for indirect lighting. This also gives you the choice to integrate the LEDs you want.

The indirect lighting profiles themselves are water resistant. If you wish to install your profiles in a damp environment, you should ensure that you obtain water-resistant LEDs/transformers.

The diffuser is made of ABS - OPAL.

The diffuser is cut in the same way as the profiles; simply with a saw or a circular saw.

The choice of LEDs will depend on the colour, the number of watts and the effect you want, as well as the room in which the lighting profiles will be installed. Due to the many possibilities and the rapid development of this technology, we do not recommend specific LEDs. However, please make sure that the strip is no wider than 1.5 cm to fit on the profile.

The temperature resistance of the profiles is +70°C, therefore it is important to ensure that the LED temperature does not exceed 70°C.

The recommendation is left to the discretion of the LED manufacturer.

For the installation of LEDs, preferably contact your electrician or the LED manufacturer.